CINAGRO® – 50w Mono-Crystalline Photovoltaic PV Solar Panel Module – 12V

Price: [price_with_discount]
(as of [price_update_date] – Details)

CINAGRO Solar 50w Monocrystalline solar PV module
Solar Module (50w) for use to recharge 12V DC batteries in parallel or 24, 48v in series connections! We Recommend use of charge controller/regulator to stop over supply to batteries. Use the sun’s power to run TVs, lights, computers, Caravans etc 

  • Peak Power (Pmax) 50W
  • Maximum power voltage (Vmp) 19.2V
  • Maximum power current (Imp) 2.62A
  • Open circuit voltage (Voc) 22.68V
  • Short circuit current (Isc) 2.80A
  • Cell efficiency 20.4%
  • Maximum system voltage DC 1000V
  • Temp.Coeff.of Isc(TK Isc) 0.037%/℃
  • Temp.Coeff.of Voc(TKVoc) -0.34%/℃
  • Temp.Coeff.of Pmax(TK Pmaxc) -0.48%/℃
  • Normal Operating Cell Temperature 45±2℃
  • Tolerance ±0-3%
  • Cell type Mono-crystalline silicon
  • Dimensions 545mm x 668mm x 30mm 
  • Packing 1 piece 
  • Warranty 25year 80% output , 10year 90% 
  • STC irradiance 1000W/M2, 
  • Temperature 25℃,AM=1.5 

Please not that no Mounting brackets or charge controllers are supplied with this unit. This product usually requires a charge controller or charge regulator to give optimum output and is not included. this item has no fitting instructions and you may require a competent fitter or additional fitting instructions. Please email us and we will be happy to assist with simple advice.
Pre-drilled holes on the back of the panel allow for fast mounting and securing. The modules can withstand high wind-pressure, snow loads and extreme temperatures.Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades
Cinagro Monocrystalline solar panel 50W -12V
Perfect for 12-volt battery charging or multiple panels can be wired in series for 24/48-volt battery charging or for grid-tied applications


Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!